Engineering Samples - 2300 Series Motors
2.3"-2.6"(58-66mm)

Engineering samples of the ThinGap Embedded Motors, Models 23XX, described here are availalbe in single quantities with approximately one week deliver (contact ThinGap for exact date). The 2300 Series Engineering Sample motors include Rotor, Stator, Hub, Shaft and Mount as standard. The M2 Mount (NEMA 23) is standard, but the M1 Mount or Parts Set configuration may be selected at no extra charge.

Inductor Board

Automated Modules, Inc. VC1-R2 Amplifier

High Switching Frequency Amplifier for ThinGap 23XX Motors, up to 5,000 rpm-48V-12A Continuous

TG100H Inductor Boards Price: $195

Price: $495

Production Quantites – 2300 Series Motors
2.3"-2.6"(58-66mm)

Production quantities of the ThinGap Embedded Motors, Models 23XX vary as typical OEM products, and depend on quantity, lot size per shipment, customization (if any) and payment terms. However, an “average” price for a Parts Set (the most popular model) generally ranges as shown to the right, depending on the parameters listed.

Engineering Samples – 8000 Series Motors
8.25" (210mm)

Engineering samples of the ThinGap Embedded Motors, Models 82XX and 84XX, described here are available in single quantities with approximately twelve week delivery (contact ThinGap for exact date). Models 82XX do not include the Mount (spider) as standard.

Spider-type mount for all 82XX series motors. Attaches to Rotor and Stator with 8 4-40 screws (each). Includes 10mm shaft and bearings. Gold anodized.

Price: $3,995.00

Production Quantites – 8000 Series Motors
8.25" (210mm)

Production quantities of the ThinGap Embedded Motors, Models 82XX vary as typical OEM products, and depend on quantity, lot size per shipment, customization (if any) and payment terms.  However, an “average” price for a Motor without Mount (spider)  generally ranges as shown below, again depending on the parameters listed above.

Engineering Samples – 14000 Series Motors
13.6" (345mm)

Engineering samples of the ThinGap Embedded Motors, 14000 Series Motors described here are available in single quantities with approximately twelve to sixteen week delivery (contact ThinGap for exact date).  Models 140XX do not include a Mount.

These motors have not yet reached the Production stage, so pricing is for budgetary purposes only – quotes for specific applications are available, and there is no technical limit to producing these motors in volume. Cost is largely driven by the RPM range required; the hoop strength necessary for the RPM dictates the Rotor material and hence the machining cost. R&D is continuously underway on these motors, including more detailed characterization, amplifier development (in cooperation with Trust Automation) and development of continuously more powerful models.

Estimated Engineering Sample Price
(Under 2,000 RPM):
$14,995

Estimated Engineering Sample Price (Over 2,000 RPM):
$24,995